TG
TraceGuard
Open Free GeoJSON Converter →

Verify Reprojected UTM Easting/Northing Coordinates on a Global EUDR Satellite Map

Confirm that reprojected UTM Zone meters land on the exact farm plot in Africa, Latin America, or Southeast Asia.

Reg. (EU) 2023/1115 & 2025/2650 TRACES NT GeoJSON Spec v1.5 GeoJSON & GIS Formats

Section 1 · Multi-Origin / Global (ISO-2 per plot) Risk Tier & Coordinate Conversion Trigger

For Multi-Origin / Global (ISO-2 per plot), Implementing Regulation (EU) 2025/1093 assigns: Low Risk (1% quota, Art. 13) | Standard Risk (3% quota, Art. 10–11) | High Risk (9% quota: BY, KP, MM, RU). Art. 9 GeoJSON mandatory across all tiers; Art. 10/11 required unless 100% segregated Low-Risk origin. Export lots frequently originate from field surveys stored in EPSG:4326 (WGS-84) 2D [longitude, latitude], >= 6 decimal places—which EU TRACES NT immediately rejects unless converted to 2D EPSG:4326 WGS-84 decimal degrees.

Key exported commodities (Coffee, Cocoa, Wood/Paper, Natural Rubber, Soya, Palm Oil, Cattle/Beef) must enforce >= 6 decimal places (~11 cm resolution), closed counter-clockwise Polygons for non-cattle plots > 4.0000 ha, zero interior holes, and strict ISO-2 ProducerCountry tagging ("CO") inside a <= 25 MB, <= 200 line DDS payload.

Section 2 · Step-by-Step Technical & Statutory Checklist

Section 3 · Pre-Flight GeoJSON & Customs Box 44 Reference Table

Compliance Parameter EU TRACES NT Spec v1.5 / Statutory Requirement
CRS & Coordinate PrecisionEPSG:4326 (WGS-84), [longitude, latitude] order, >= 6 decimal places (~11 cm), 2D-only (no Z-altitude)
4.0000 ha Geometry RuleClosed Polygon > 4.0000 ha (non-cattle) | Single Point <= 4.0000 ha or cattle establishments
Required Feature.propertiesProducerCountry ("CO"), ProducerName, ProductionPlace, unquoted numeric Area (ha, 4 decimals)
Topology & Payload CapsClosed CCW exterior ring (first == last), zero self-intersections, zero interior holes, <= 25 MB & <= 200 lines/DDS
HS / CN Scope & DeadlinesAnnex I Regulated Commodities (Ch. 09, 12, 15, 18, 40, 44, 47, 48, 94, 01–02) — Dec 30, 2026 (Large/Medium & EUTR Timber) | June 30, 2027 (Micro/Small Art. 38(3), excl. EUTR timber) | Reg. 2026/2102 Sept 2026 / Dec 2027 updates
Customs Box 44 TARIC CodeC716 (Primary) | Y141 (SME until June 29, 2027, excl. EUTR timber) | C717 (EU SME producer) | Y188/Y196 (Downstream Export)
Reg. (EU) 2025/1093 Risk TierLow Risk (1% quota, Art. 13) | Standard Risk (3% quota, Art. 10–11) | High Risk (9% quota: BY, KP, MM, RU) — Art. 9 GeoJSON mandatory across all tiers; Art. 10/11 required unless 100% segregated Low-Risk origin
Valid EU TRACES NT Spec v1.5 GeoJSON Reference Example:
{
  "type": "FeatureCollection",
  "features": [
    {
      "type": "Feature",
      "properties": {
        "ProducerCountry": "CO",
        "ProducerName": "Verified Cooperative Lot 01",
        "ProductionPlace": "Verified Production Plot #1",
        "Area": 6.4215
      },
      "geometry": {
        "type": "Polygon",
        "coordinates": [
          [
            [
              -75.612345,
              2.192346
            ],
            [
              -75.609845,
              2.192346
            ],
            [
              -75.609845,
              2.194666
            ],
            [
              -75.612345,
              2.194666
            ],
            [
              -75.612345,
              2.192346
            ]
          ]
        ]
      }
    }
  ]
}

Section 4 · Technical FAQ (EU TRACES NT Spec v1.5 & 2026/2027 Compliance)

What is the EUDR country risk tier for Multi-Origin / Global (ISO-2 per plot)?

Under Implementing Regulation (EU) 2025/1093, Multi-Origin / Global (ISO-2 per plot) is designated Low Risk (1% quota, Art. 13) | Standard Risk (3% quota, Art. 10–11) | High Risk (9% quota: BY, KP, MM, RU). Art. 9 GeoJSON mandatory across all tiers; Art. 10/11 required unless 100% segregated Low-Risk origin.

Why must local UTM, CAR, or KML survey files be converted before sending to EU buyers?

EU TRACES NT GeoJSON Spec v1.5 accepts only implicit EPSG:4326 (WGS-84) [longitude, latitude] decimal degrees with >= 6 decimal places, 2D coordinates, and no interior holes.

Does Low-Risk status waive the Article 9 GeoJSON requirement?

No. Even for Low-Risk countries qualifying for Article 13 Simplified Due Diligence, collecting 6-decimal WGS-84 plot geolocation and filing a TRACES NT DDS (TARIC C716) remain strictly mandatory.

Section 5 · Related EUDR Technical Guides (Internal Pillar Hub)

100% Client-Side Browser RAM · Zero Cloud Upload

Validate, Convert & Auto-Repair Supplier Files in 10 Seconds

100% Client-Side Browser RAM Processing (Zero Cloud Upload, Zero GDPR Supplier Exposure). Supports Excel/CSV, KML, GPX, UTM, WKT, WhatsApp DMS & GeoJSON.

Open Free GeoJSON Converter →