TG
TraceGuard
Open Free GeoJSON Converter →

EUDR Timber, Plywood & Wooden Flooring Importer Guide (Chapter 44 & HS 9403)

Convert forestry concession shapefiles, KML placemarks, and UTM surveys into compliant EPSG:4326 EU TRACES NT GeoJSON.

Reg. (EU) 2023/1115 & 2025/2650 TRACES NT GeoJSON Spec v1.5 Commodity & Exemptions

Section 1 · Annex I HS/CN Scope & Customs Compliance Trigger

Importers and operators handling HS Ch. 44 (Timber, Plywood, Joinery), Ch. 47 (Wood Pulp), Ch. 48 (Paper), HS 9403 (Wooden Furniture) face strict EU customs verification starting December 30, 2026 for medium/large enterprises (and June 30, 2027 for qualifying Article 38(3) micro/small operators—excluding legacy EUTR timber). Every shipment requires verified geolocation tracing back to plots harvested after December 31, 2020.

Statutory requirements include declaring exact 8-digit CN codes, species (Pinus sylvestris, Quercus robur, Eucalyptus grandis, Tectona grandis), and GeoJSON Spec v1.5 geometries (Closed 2D WGS-84 Polygon > 4.0000 ha (zero interior holes; zero 3D Z-altitude)) paired with Box 44 TARIC document codes (C716 (Primary Operator) | C717 (EU domestic micro/small primary producer)).

Section 2 · Step-by-Step Technical & Statutory Checklist

Section 3 · Pre-Flight GeoJSON & Customs Box 44 Reference Table

Compliance Parameter EU TRACES NT Spec v1.5 / Statutory Requirement
CRS & Coordinate PrecisionEPSG:4326 (WGS-84), [longitude, latitude] order, >= 6 decimal places (~11 cm), 2D-only (no Z-altitude)
4.0000 ha Geometry RuleClosed 2D WGS-84 Polygon > 4.0000 ha (zero interior holes; zero 3D Z-altitude)
Required Feature.propertiesProducerCountry ("CO"), ProducerName, ProductionPlace, unquoted numeric Area (ha, 4 decimals)
Topology & Payload CapsClosed CCW exterior ring (first == last), zero self-intersections, zero interior holes, <= 25 MB & <= 200 lines/DDS
HS / CN Scope & DeadlinesHS Ch. 44 (Timber, Plywood, Joinery), Ch. 47 (Wood Pulp), Ch. 48 (Paper), HS 9403 (Wooden Furniture) — Timber/Wood Dec 30, 2026 (NO SME deferral for timber formerly under EUTR); Ch. 49 Books EXEMPT
Customs Box 44 TARIC CodeC716 (Primary Operator) | C717 (EU domestic micro/small primary producer)
Reg. (EU) 2025/1093 Risk TierLow Risk (1% quota, Art. 13) | Standard Risk (3% quota, Art. 10–11) | High Risk (9% quota: BY, KP, MM, RU) — Art. 9 GeoJSON mandatory across all tiers; Art. 10/11 required unless 100% segregated Low-Risk origin
Valid EU TRACES NT Spec v1.5 GeoJSON Reference Example:
{
  "type": "FeatureCollection",
  "features": [
    {
      "type": "Feature",
      "properties": {
        "ProducerCountry": "CO",
        "ProducerName": "Verified Cooperative Lot 01",
        "ProductionPlace": "Verified Production Plot #1",
        "Area": 6.4215
      },
      "geometry": {
        "type": "Polygon",
        "coordinates": [
          [
            [
              -75.612345,
              2.192346
            ],
            [
              -75.609845,
              2.192346
            ],
            [
              -75.609845,
              2.194666
            ],
            [
              -75.612345,
              2.194666
            ],
            [
              -75.612345,
              2.192346
            ]
          ]
        ]
      }
    }
  ]
}

Section 4 · Technical FAQ (EU TRACES NT Spec v1.5 & 2026/2027 Compliance)

When do EUDR obligations apply to Timber, Pulp, Paper & Furniture (Ch. 44/47/48, HS 9403)?

Timber/Wood Dec 30, 2026 (NO SME deferral for timber formerly under EUTR); Ch. 49 Books EXEMPT

What GeoJSON geometry is required for Timber, Pulp, Paper & Furniture (Ch. 44/47/48, HS 9403)?

Closed 2D WGS-84 Polygon > 4.0000 ha (zero interior holes; zero 3D Z-altitude). All coordinates must use EPSG:4326 [longitude, latitude] with >= 6 decimal places, 2D-only, and unquoted numeric Area in hectares.

What changed under Delegated Regulation (EU) 2026/2102?

Effective September 18, 2026, Reg. 2026/2102 removed cattle leather/hides (4101, 4104, 4107), vulcanised rubber belts/articles (ex 4010/4016), and soya sowing seeds (1201 10 00) (following earlier removal of Chapter 49 printed books under Reg. 2025/2650), while phasing in ONLY soluble coffee (2101 11 00), frozen cattle tongues (ex 0206 21 00), and palm-oil soap (ex 3401) from December 30, 2027.

Section 5 · Related EUDR Technical Guides (Internal Pillar Hub)

100% Client-Side Browser RAM · Zero Cloud Upload

Validate, Convert & Auto-Repair Supplier Files in 10 Seconds

100% Client-Side Browser RAM Processing (Zero Cloud Upload, Zero GDPR Supplier Exposure). Supports Excel/CSV, KML, GPX, UTM, WKT, WhatsApp DMS & GeoJSON.

Open Free GeoJSON Converter →