TG
TraceGuard
Open Free GeoJSON Converter →

Germany EUDR Guide: BLE Competent Authority Audits & ATLAS Customs C716 Filing

How German importers prepare 6-decimal WGS-84 supplier GeoJSON files for the Bundesanstalt für Landwirtschaft und Ernährung (BLE) and Zoll ATLAS.

Reg. (EU) 2023/1115 & 2025/2650 TRACES NT GeoJSON Spec v1.5 Country Benchmarking & Origins

Section 1 · Germany (DE) Competent Authority & Customs Hold Triggers

Under Regulation (EU) 2023/1115 and Implementing Regulation (EU) 2025/1093, Germany (DE) is an EU-27 Low-Risk Member State (1% annual audit quota for domestic production), with enforcement overseen by BLE (Bundesanstalt für Landwirtschaft und Ernährung) alongside German Zoll ATLAS (Unterlagencodierung C716 / Y141).

When importers clear coffee, cocoa, soy, palm oil, rubber, timber, or beef through Hamburg & Bremerhaven, customs brokers must declare TARIC code C716 with an active TRACES NT DDS reference number starting December 30, 2026 (June 30, 2027 for qualifying Article 38(3) micro/small operators, except timber formerly under EUTR). If underlying farm coordinates come from Standard-Risk origins (3% check quota) or High-Risk origins (9% check quota), full Article 10/11 due diligence applies.

Section 2 · Step-by-Step Technical & Statutory Checklist

Section 3 · Pre-Flight GeoJSON & Customs Box 44 Reference Table

Compliance Parameter EU TRACES NT Spec v1.5 / Statutory Requirement
CRS & Coordinate PrecisionEPSG:4326 (WGS-84), [longitude, latitude] order, >= 6 decimal places (~11 cm), 2D-only (no Z-altitude)
4.0000 ha Geometry RuleClosed Polygon > 4.0000 ha (non-cattle) | Single Point <= 4.0000 ha or cattle establishments
Required Feature.propertiesProducerCountry ("DE"), ProducerName, ProductionPlace, unquoted numeric Area (ha, 4 decimals)
Topology & Payload CapsClosed CCW exterior ring (first == last), zero self-intersections, zero interior holes, <= 25 MB & <= 200 lines/DDS
HS / CN Scope & DeadlinesAnnex I Regulated Commodities (Ch. 09, 12, 15, 18, 40, 44, 47, 48, 94, 01–02) — Dec 30, 2026 (Large/Medium & EUTR Timber) | June 30, 2027 (Micro/Small Art. 38(3), excl. EUTR timber) | Reg. 2026/2102 Sept 2026 / Dec 2027 updates
Customs Box 44 TARIC CodeC716 (Primary) | Y141 (SME until June 29, 2027, excl. EUTR timber) | C717 (EU SME producer) | Y188/Y196 (Downstream Export)
Reg. (EU) 2025/1093 Risk TierLow Risk (1% check quota — EU-27 Member State) — Eligible for Article 13 Simplified Due Diligence for domestic harvest; imports from outside EU follow origin country risk tier
Valid EU TRACES NT Spec v1.5 GeoJSON Reference Example:
{
  "type": "FeatureCollection",
  "features": [
    {
      "type": "Feature",
      "properties": {
        "ProducerCountry": "DE",
        "ProducerName": "Verified Cooperative Lot 01",
        "ProductionPlace": "Germany Harvest / Import Lot",
        "Area": 6.4215
      },
      "geometry": {
        "type": "Polygon",
        "coordinates": [
          [
            [
              10.451526,
              51.165691
            ],
            [
              10.454026,
              51.165691
            ],
            [
              10.454026,
              51.168011
            ],
            [
              10.451526,
              51.168011
            ],
            [
              10.451526,
              51.165691
            ]
          ]
        ]
      }
    }
  ]
}

Section 4 · Technical FAQ (EU TRACES NT Spec v1.5 & 2026/2027 Compliance)

Who audits EUDR compliance in Germany?

BLE (Bundesanstalt für Landwirtschaft und Ernährung) acts as the national Competent Authority conducting risk-based checks (1% Low Risk, 3% Standard Risk, 9% High Risk) on filings submitted through EU TRACES NT and German Zoll ATLAS (Unterlagencodierung C716 / Y141).

Do domestic EU timber or cattle producers in Germany need geolocation?

Yes. Although all 27 EU Member States qualify as Low Risk (Article 13 Simplified Due Diligence), Article 9 plot geolocation (WGS-84 6 decimals) and TRACES NT filing (or C717 for eligible domestic micro/small primary producers) remain mandatory.

Does the June 30, 2027 SME deferral apply to imported timber and furniture?

No. Products previously covered by the legacy EU Timber Regulation (EUTR) must comply from December 30, 2026 regardless of enterprise size.

Section 5 · Related EUDR Technical Guides (Internal Pillar Hub)

100% Client-Side Browser RAM · Zero Cloud Upload

Validate, Convert & Auto-Repair Supplier Files in 10 Seconds

100% Client-Side Browser RAM Processing (Zero Cloud Upload, Zero GDPR Supplier Exposure). Supports Excel/CSV, KML, GPX, UTM, WKT, WhatsApp DMS & GeoJSON.

Open Free GeoJSON Converter →