TG
TraceGuard
Open Free GeoJSON Converter →

China EUDR GeoJSON & TRACES NT Guide for Furniture, Plywood & Paper Exporters

How Chinese manufacturers and their EU retail buyers compile multi-tract harvest GeoJSON under Low-Risk Article 13 rules.

Reg. (EU) 2023/1115 & 2025/2650 TRACES NT GeoJSON Spec v1.5 Country Benchmarking & Origins

Section 1 · Why EU TRACES NT Rejects This & Regulatory Trigger

China is classified as 'Low Risk' under Commission Implementing Regulation (EU) 2025/1093, and printed books (Chapter 49) were removed from EUDR scope in December 2025. However, wooden furniture (HS 9403), plywood/veneered panels (4412), frames (4414), and paper packaging sold as a product in its own right still require plot-level WGS-84 forest harvest polygons for every shipment entering the EU after December 30, 2026.

Under Regulation (EU) 2023/1115 (as amended by Regulation (EU) 2025/2650 and Delegated Regulation (EU) 2026/2102), compliance applies from December 30, 2026 for medium and large operators/traders (and all legacy EUTR timber) and June 30, 2027 for qualifying micro and small enterprises established by December 31, 2024. Ensuring strict TRACES NT Spec v1.5 geometry prevents Box 44 customs holds under TARIC document code C716.

Section 2 · Step-by-Step Technical & Statutory Checklist

Section 3 · Pre-Flight GeoJSON & Customs Box 44 Reference Table

Compliance Parameter EU TRACES NT Spec v1.5 / Statutory Requirement
CRS & Coordinate PrecisionEPSG:4326 (WGS-84), [longitude, latitude] order, >= 6 decimal places (~11 cm), 2D-only (no Z-altitude)
4.0000 ha Geometry RuleClosed 2D WGS-84 Polygon > 4.0000 ha (zero interior holes; zero 3D Z-altitude)
Required Feature.propertiesProducerCountry ("CN"), ProducerName, ProductionPlace, unquoted numeric Area (ha, 4 decimals)
Topology & Payload CapsClosed CCW exterior ring (first == last), zero self-intersections, zero interior holes, <= 25 MB & <= 200 lines/DDS
HS / CN Scope & DeadlinesHS Ch. 44 (Timber, Plywood, Joinery), Ch. 47 (Wood Pulp), Ch. 48 (Paper), HS 9403 (Wooden Furniture) — Timber/Wood Dec 30, 2026 (NO SME deferral for timber formerly under EUTR); Ch. 49 Books EXEMPT
Customs Box 44 TARIC CodeC716 (Primary Operator) | C717 (EU domestic micro/small primary producer)
Reg. (EU) 2025/1093 Risk TierLow Risk (1% check quota) — Eligible for Article 13 Simplified Due Diligence (Article 9 GeoJSON still mandatory)
Valid EU TRACES NT Spec v1.5 GeoJSON Reference Example:
{
  "type": "FeatureCollection",
  "features": [
    {
      "type": "Feature",
      "properties": {
        "ProducerCountry": "CN",
        "ProducerName": "Verified Cooperative Lot 01",
        "ProductionPlace": "Managed Plantation Forest Harvest Tract",
        "Area": 6.4215
      },
      "geometry": {
        "type": "Polygon",
        "coordinates": [
          [
            [
              118.796877,
              32.060255
            ],
            [
              118.799377,
              32.060255
            ],
            [
              118.799377,
              32.062575
            ],
            [
              118.796877,
              32.062575
            ],
            [
              118.796877,
              32.060255
            ]
          ]
        ]
      }
    }
  ]
}

Section 4 · Technical FAQ (EU TRACES NT Spec v1.5 & 2026/2027 Compliance)

What is the primary compliance requirement covered in China EUDR GeoJSON & TRACES NT Guide for Furniture, Plywood & Paper Exporters?

China is classified as 'Low Risk' under Commission Implementing Regulation (EU) 2025/1093, and printed books (Chapter 49) were removed from EUDR scope in December 2025. However, wooden furniture (HS 9403), plywood/veneered panels (4412), frames (4414), and paper packaging sold as a product in its own right still require plot-level WGS-84 forest harvest polygons for every shipment entering the EU after December 30, 2026.

What are the current EUDR enforcement deadlines and Reg. 2026/2102 scope rules?

Large and medium operators and traders (plus legacy EUTR timber products) must comply from December 30, 2026, while qualifying micro and small enterprises established by December 31, 2024 comply from June 30, 2027 (declaring TARIC Y141 until June 29, 2027). Delegated Regulation (EU) 2026/2102 removed cattle leather (4101, 4104, 4107), rubber belts/articles (ex 4010/4016), and soya sowing seeds (1201 10 00) on September 18, 2026 (following Chapter 49 books under Reg. 2025/2650), while phasing in instant coffee (2101 11 00), frozen cattle tongues (ex 0206 21 00), and palm-oil soap (ex 3401) on December 30, 2027.

How does TraceGuard EUDR validate and repair supplier coordinates privately?

TraceGuard EUDR parses Excel/CSV, KML, GPX, UTM, WKT, WhatsApp DMS, and GeoJSON 100% locally inside your browser's RAM—automatically closing open rings, untangling bowties (<= 2% area guard), stripping 3D Z-coordinates and holes, fixing quoted Area values, and normalizing 6-decimal precision without uploading confidential supplier lists to external servers.

Section 5 · Related EUDR Technical Guides (Internal Pillar Hub)

100% Client-Side Browser RAM · Zero Cloud Upload

Validate, Convert & Auto-Repair Supplier Files in 10 Seconds

100% Client-Side Browser RAM Processing (Zero Cloud Upload, Zero GDPR Supplier Exposure). Supports Excel/CSV, KML, GPX, UTM, WKT, WhatsApp DMS & GeoJSON.

Open Free GeoJSON Converter →